

Yeah FLX1 uses phosh
Yeah FLX1 uses phosh
There are 2 main problems with Linux phones.
Hardware. Most Linux phones don’t use an SoC intended for a phone, or use outdated/slow hardware. This is a big reason why devices like Librem 5 and PinePhone aren’t viable in the long run.
Software. Currently the software side of things still needs a ton of work.
From what I can see, there seems to be a bit of a bit of a focus (obsession?) on Linux phones only running mainline Linux kernel and as FOSS as possible from the very beginning, rather than building something that works and then improving things over time.
This is why I like the approach that FuriLabs is taking. Yes, they don’t use a mainline kernel (they currently use the MediaTek kernel). And they use Halium and (probably) some proprietary drivers. But they are building something that (mostly) works like an actual phone, which from what I have seen/heard is a lot more than what can be said of other phones. And they have been putting in quite a bit of work improving the UX, which makes up a lot of the software side usability problems. They can try to mainline later.
I should also probably mention I own an FLX1, which may make me slightly biased when discussing this topic. There are some things I don’t like about it though, such as the size and weight. LCD screen instead of OLED is also a bit of a bummer.
If you are following best practices, you would be using a device with a password (ideally full disk encryption, but whatever) to access the password manager in the first place. Using just biometrics to log into PC or phone is a bad idea. Most phones require a password/passcode for first unlock due to disk encryption.
Technically not WordPress. They were purchased by Automattic, which runs WordPress.com.
While Automattic is among the many companies contributing to the WordPress project, neither it nor WordPress.com are affiliated with the software/project or the WordPress Foundation.
Tumblr is owned by Automattic, which runs WordPress.com. Tumblr migrating to WordPress is not a surprise in the slightest.
I think you are forgetting that most home-labbers probably can’t afford to get a fur suit due to their homelab.
Source: Am home-labber
Well, not really. The FLX1 has a reasonably good phone SOC (Mediatek Dimensity 900). The big problem is that the phone SOCs typically use more proprietary software and use kernels that aren’t mainline. The massive obsession of using mainline Linux kernel only leads most Linux phones to use SOCs that aren’t suited to phones, basically trying to fit a square peg into a round hole. Furilabs has proven with the FLX1 that you can get competent Linux phone hardware, if you concede using mainline Linux kernel.
Although the FLX1 has some hardware downsides (size, weight and screen technology), these are more down to the implementation and goals of this specific device. The ODM of the FLX1 intended the hardware as a rugged phone, hence the size and weight. Price was likely a factor in the choice not to use OLED.
With the hardware of the FLX1 being competent, it highlights the shortcomings of the software. Phosh still needs a ton of work to be great, most Linux software isn’t designed to be used on a phone, etc. I especially hate the phosh keyboard and it needs a ton of work to be even semi-decent. Phosh should honestly just copy the design of the Android keyboard.